ABOUT US
Sed ut perspiciatis unde omnis iste natus error sit voluptatem
accusantium doloremque laudantium, totam rem aperiam,
GET A FREE QUOTE
-
Home
-
Products
-
Dynamic Compaction Equipment
- Characteristics and Applications of Dynamic Compaction Machines
Characteristics and Applications of Dynamic Compaction Machines
YTQH series professional dynamic compaction machine with full rotation and multi section truss arm combination. This model has the characteristics of high efficiency, high reliability, and intelligent operation, which can meet the needs of most compaction construction. Widely applicable to dynamic compaction construction operations for foundation reinforcement treatment of industrial and civil buildings, warehouses, roadbeds, airports, and docks.
Remarkable reinforcement effect
By dropping heavy tamps freely from a height, strong impact and vibration are applied to the foundation, improving bearing capacity, reducing compressibility and minimizing settlement.
Wide application range
Suitable for treating most foundations including gravel soil, sandy soil, silt soil, cohesive soil, collapsible loess, plain fill and miscellaneous fill.
High construction efficiency & low cost
Simple process and flexible equipment ensure fast construction. Compared with replacement and pile foundation, it features lower cost and shorter construction period.
Energy-saving & eco-friendly
Basically no cement or steel is consumed, reducing construction waste and material transportation, making it economical and green.
Strong equipment adaptability
Equipped with crawler travel gear, it has good site adaptability and can work flexibly in mountainous areas, backfill areas and large-scale construction sites.
Controllable quality
The reinforcement depth and effect can be precisely controlled by adjusting tamping energy, tamping point spacing and tamping times.
Main Application Fields
Industrial & Civil Construction
Foundation reinforcement for backfilled sites of factories, warehouses, residential buildings, etc., to eliminate uneven settlement.
Road & Traffic Engineering
Reinforcement of subgrades for highways, railways, airport runways and other traffic facilities.
Port & Yard Engineering
Large-area foundation treatment for wharf yards, freight yards and logistics parks.
Mining & Plant Reconstruction
Backfilling in mining areas, site leveling and foundation reinforcement of old industrial plants.
Water Conservancy Engineering
Dike foundation reinforcement for dams, reservoir areas and flood control projects.
Special Foundation Treatment
Reinforcement of complex foundations such as collapsible loess, soft fill and high-fill in mountainous areas.
| Technical Specification | ||||||
| Item | Unit | YTQH1000B | YTQH650B | YTQH450B | YTQH350B | YTQH259B |
|---|---|---|---|---|---|---|
| Compaction capacity | t.m | 1000(2000) | 650(1300) | 450(800) | 350(700) | 259(500) |
| Hammer weight permit | t.m | 50 | 32.5 | 22.5 | 17.5 | 15 |
| Wheel tread | mm | 7300 | 6410 | 5300 | 5090 | 4890 |
| Chassis width | mm | 6860 | 5850 | 3360(4890) | 3360(4520) | 3360(4520) |
| Track width | mm | 850 | 850 | 800 | 760 | 760 |
| Boom length | mm | 20-26（29） | 19-25(28) | 19-25(28) | 19-25(28) | 19-22 |
| Working angle | ° | 66-77 | 60-77 | 60-77 | 60-77 | 60-77 |
| Max.lift height | mm | 27 | 26 | 25.96 | 25.7 | 22.9 |
| Working radius | mm | 7.0-15.4 | 6.5-14.6 | 6.5-14.6 | 6.3-14.5 | 6.2-12.8 |
| Max. pull force | t.m | 25 | 14-17 | 10-14 | 10-14 | 10 |
| Lift speed | m/min | 0-110 | 0-95 | 0-110 | 0-110 | 0-108 |
| Slewing speed | r/min | 0-1.5 | 0-1.6 | 0-1.8 | 0-1.8 | 0-2.2 |
| Travel speed | km/h | 0-1.4 | 0-1.4 | 0-1.4 | 0-1.4 | 0-1.3 |
| Grade ability | 30% | 30% | 35% | 40% | 40% | |
| Engine power | kw | 294 | 264 | 242 | 194 | 132 |
| Engine rated revolution | r/min | 1900 | 1900 | 1900 | 1900 | 2000 |
| Total weight | t.m | 118 | 84.6 | 66.8 | 58 | 54 |
| Counter weight | t.m | 36 | 28 | 21.2 | 18.8 | 17.5 |
| Main body weight | t.m | 40 | 28.5 | 38 | 32 | 31.9 |
| Dimensino(LxWxH) | mm | 95830x3400x3400 | 7715x3360x3400 | 8010x3405x3420 | 7025x3360x3200 | 7300x3365x3400 |
| Ground pressure ratio | mpa | 0.085 | 0.074 | 0.073 | 0.073 | 0.068 |
| Rated pull force | t.m | 13 | 11 | 8 | 7.5 | |
| Lift rope diameter | mm | 32 | 32 | 28 | 26 | |
OUR PRODUCTS
Best-selling Products
TH16 Hydraulic piling rig
Hydraulic piling rig is a highly efficient and environmentally friendly modern piling equipment that uses hydraulic hammer or diesel hammer to generate high-frequency vibration or impact force to drive piles into the soil. With its advantages of low noise, high efficiency, and high mobility, it has become a core construction equipment in fields such as highways, bridges, offshore wind power, and municipal engineering.
Model: TH16
Max pile driving length: 16m
Max pile driving: 400*400mm
Undercarriage: Selfundercarriage
Hammer Type: Diesel hammer
TH80-Hydraulic-Piling-Rig
Model: TH80
Max pile driving length: 16m
Max pile driving: 650*650mm
Max drilling depth: 25m
Drilling diameter: 800mm
Max drilling depth in Kelly bar: 90m
Drilling diameter in Kelly bar : 2500mm
TH60 Hydraulic Piling Rig
Model: TH60
Max pile driving length: 16m
Max pile driving: 400*400mm
Max drilling depth in CFA: 20m
Drilling diameter in CFA : 400mm
Max drilling depth in Kelly bar: 60m
Drilling diameter in Kelly bar : 1500mm
SWS-03 Solar Pile Driver
Engine rated power: 37/58 KW
Hydraulic hammer force: 1000-1200 J
Working mode of hydraulic hammer: High frequency
Walking speed: 2-3 Km
Weight: 4200 Kg
Hydraulic system pressure: 20-25 Mpa
Borehole diameter: 150-200 mm
Pressure of hydraulic hammer: 20 Mpa
Drilling depth: 1.8 m
SWS-02 Solar Pile Driver
Engine rated power: 37 KW
Hydraulic hammer force: 1000-1200 J
Working mode of hydraulic hammer: High frequency
Walking speed: 10 Km
Weight: 3700 Kg
Hydraulic system pressure: 16 Mpa
Borehole diameter: Φ138-178 mm
Drilling depth: 1.8 m
SWS-01 Solar Pile Driver
Engine rated power: 37 KW
Hydraulic hammer force: 1000-1200 J
Working mode of hydraulic hammer: High frequency
Walking speed: 10-15 Km
Weight: 2800 Kg
Hydraulic system pressure: 16 Mpa
Borehole diameter: Φ138-178 mm
Drilling depth: 1.8 m
OUR LATEST
Our Latest Blog & News
SERVICES
Services
Professional and reliable after-sales service
We provide a comprehensive and responsive after-sales service to ensure your operations run smoothly. Our support team offers 12-hour online service to address your inquiries promptly, regardless of your location worldwide.
Additionally, we have our own professional after-sales engineers who can be dispatched to your site as required. Our on-site services include installation, commissioning, operator training, and pile testing, all tailored to meet your specific needs and ensure optimal performance of your equipment.
Production-to-shipment tracking and feedback process
We provide comprehensive, end-to-end tracking and regular updates throughout the entire process, from production initiation to final shipment.
Our systematic tracking covers each critical stage: assembly, quality inspection, testing, packaging, and final loading for dispatch. At every milestone, we proactively provide detailed feedback, including photos, videos, and progress reports.
This transparent communication ensures you are fully informed and can plan confidently for the seamless arrival of your equipment, eliminating uncertainty and facilitating a smooth project timeline.
Professional pre-sales services
Our pre-sales service is designed to optimize your procurement process from the very beginning. By integrating the expertise of our sales personnel with our technical engineering team, we provide professional consultation based on your specific project requirements.
This collaborative approach significantly reduces your upfront selection costs and improves overall efficiency. We focus on delivering precise product recommendations, ensuring the proposed equipment is the most suitable and effective solution for your project needs, ultimately helping you make a well-informed and confident purchasing decision.
