ABOUT US
Sed ut perspiciatis unde omnis iste natus error sit voluptatem
accusantium doloremque laudantium, totam rem aperiam,
GET A FREE QUOTE
-
Home
-
Products
-
Water Well Drilling Rig
-
Crawler Water Well Drilling Rigs
- SNR1000 Water well drilling rig
SNR1000 Water well drilling rig
Full hydraulic multi-functional water well drill rig, the mainly drilling method is muddy rotary drilling, and DTH Hammer drilling system, can meet the drilling requirements of different geological conditions drilling and other vertical holes.
Application: It is widely used in engineering construction for drilling wells, monitoring wells and ground-source heat pump air-conditioner, and also applied in hole blasting, bolting and anchor cable, etc.
Model: SNR1000
Max. Drilling Depth: 1000m;
Drilling Method: Mud drilling and Air Drilling
Drilling diameter: 105-800mm
Drill Rod: 114mm
Walking Type: Crawler, Trailer and Truck
Application: It is widely used in engineering construction for drilling wells, monitoring wells and ground-source heat pump air-conditioner, and also applied in hole blasting, bolting and anchor cable, etc.
Model: SNR1000
Max. Drilling Depth: 1000m;
Drilling Method: Mud drilling and Air Drilling
Drilling diameter: 105-800mm
Drill Rod: 114mm
Walking Type: Crawler, Trailer and Truck
The SNR1000 fully hydraulic crawler mounted water well drilling rig is suitable for big drilling projects with a maximum drilling depth of 1000m and a drilling diameter range of 105-800mm. The main shaft pressure is 8t and the lifting force is 52t. The SNR1000 is compatible with 114mm drill rod. And the maximum rotary torque is 20000/10000 N.m. Weight of the rig is 17.5 tons and the dimension is 7*2.25*2.65m.
Main Features
- The key hydraulic components of the SNR1000 waterdrilling rig are all imported brand accessories, which significantly reduces its failure rate and extends the working life of the rig, while also reducing the overall weight of the machine. And the lifting capacity can reach up to 52 tons, with a maximum drilling diameter of 800mm.
- Equipped with water vapor dual-purpose rotary head, whichcan use air DTH hammer drilling and mud drilling;
- Rotation, drilling, and lifting of the drilling rig are all controlled by hydraulic dual speed adjustment, which makes thedrilling parameters more reasonably matched with the drilling conditions.
- The hydraulic system is equipped with an independent air-cooled hydraulic oil radiator, and a water-cooled radiator can beoptionally installed according to user requirements to ensure efficient and continuous operation of the drilling rig hydraulic
- system under high temperature climate conditions in different regions.
- Equipped with the BW1200 mud pump, the large displacement guarantees effective cuttings transport and high penetration rates, whereas the high pressure enables overcoming circulation resistance in deep holes and sustaining stable fluid return, thereby realizing efficient, safe, and low-cost drilling for 1000-meter water wells.
- The auxiliary actions such as loading and unloading drill rods, leveling the drilling rig, and hoisting are allcontrolled by a hydraulic system. The rig features a reasonable structural layout, making it easy to operate and
- Equipped withCummins engine which ensure the stability of drilling rig in working condition;
- Thefully hydraulic dual rotary head can be optional. using a down the hole impact hammer，mud drilling or drilling with casing to meet different geological conditions for drilling operations. Suitable for projects such as large-diameter water wells, pile holes, and mine rescue.
Parameters
| Item | Unit | SNR1000 |
|---|---|---|
| Max drilling depth | m | 1000 |
| Drilling diameter | mm | 105-800 |
| Air pressure | Mpa | 1.6-8 |
| Air consumption | m³/min | 16-96 |
| Rod length | m | 6 |
| Rod diameter | mm | 114 |
| Main shaft pressure | T | 8 |
| Lifting force | T | 52 |
| Fast lifting speed | m/min | 30 |
| Fast forwarding speed | m/min | 61 |
| Max rotary torque | N.m | 20000/10000 |
| Max rotary speed | r/min | 70/140 |
| Small secondary winch lifting force | T | 2.5 |
| Jacks stroke | m | 1.7 |
| Drilling efficiency | m/h | 10-35 |
| Moving speed | Km/h | 5 |
| Weight of the rig | T | 17.5 |
| Dimension | m | 7*2.25*2.65 |
OUR PRODUCTS
Best-selling Products
Single shaft mixing machine
This rig is specifically fitted with a mixing device for the DSM method (such as double-axis or triple-axis mixing drill rods). During construction, the rig provides stable vertical lift and downward pressure, driving the drill rods to rotate and inject cement grout, forcibly mixing soft soil with the solidifying agent to form underground continuous walls or reinforced blocks.
Application Scenarios: Soft Ground Reinforcement
Cutoff Wall: Forms an interlocking continuous wall for water isolation in excavation pits.
Foundation Reinforcement: Enhances the bearing capacity of soft ground and reduces settlement.
Environmental Remediation: Used for in-situ solidification treatment of contaminated soil.
CFA Long Auger Drilling Rig
The ZB series CFA long auger drilling rig is operated by an electrical hydraulic system and adopts a walking mode or crawler base. When working, the long auger drilling rig is used to drill to the design elevation, and when lifting the drill, concrete is pumped into the pile through a concrete conveying pump (or a steel cage can be inserted later). Both drilling and piling are completed synchronously with one machine. The installation of rotary heads can also be used for various foundation construction techniques such as superfluid and long spiral drilling piles.
Fully Hydraulic CFA Drilling Rig
The fully hydraulic CFA (continuous spiral drilling pile) drilling rig is the core equipment for modern pile foundation construction, with high efficiency, low noise, environmental protection, and stable pile quality as its core advantages. It is widely used in urban and complex geological foundation engineering.
TR180W：
Torque: 90kN.m Max diameter: 800mm Max depth: 16.5m
TR220W：
Torque: 100kN.m Max diameter: 1000mm Max depth: 20m
TR250W：
Torque: 120kN.m Max diameter: 1200mm Max depth: 23.5m
TR280W：
Torque: 120kN.m Max diameter: 1200mm Max depth: 26m
SPA5 Pile breaker
The hydraulic pile breaker has the following features: easy, operation, high efficiency, low cost, less Noise, more safety and stability. It imposes no impact force on the parent body of the pile and no influence on the bearing capacity of the pile, and shortens the construction period greatly. It is applicable for pile-group works and is recommended strongly by the construction department and and the supervision department.
Model: SPA5
Pile diameter: 1050-1200mm
Max Drill Rod pressure: 485kN
Pile type: Round & Square pile
SHD6 Horizontal Directional Drill
The SHD series horizontal directional drilling rig is mainly used for laying and updating pipelines for water supply, gas, electricity, telecommunications, oil, natural gas, etc. under difficult excavation conditions such as crossing highways, railways, buildings, rivers, as well as downtown areas, cultural relics protection areas, crop and vegetation protection areas. Crossing diameter 150mm-2000mm, crossing length 100-2000 meters.
Model: SHD6
Engine power: 46.3 KW
Max. Thrust force: 60KN
Max. Pullback force: 60KN
Max. Torque: 2000N.M
Max. diameter of pullback pipe: φ150~φ600mm
Max. construction length: ~100m
SNR200 Water well drilling rig
Full hydraulic multi-functional water well drill rig, the mainly drilling method is muddy rotary drilling, and DTH Hammer drilling system, can meet the drilling requirements of different geological conditions drilling and other vertical holes.
Application: It is widely used in engineering construction for drilling wells, monitoring wells and ground-source heat pump air-conditioner, and also applied in hole blasting, bolting and anchor cable, etc.
Model : SNR200
Max. Drilling Depth: 200m;
Drilling Method: Mud drilling and Air Drilling
Drilling diameter: 105-300mm
Drill Rod: 89/76mm drill rod;
Walking Type: Crawler, Trailer and Truck
OUR LATEST
Our Latest Blog & News
SERVICES
Services
Professional and reliable after-sales service
We provide a comprehensive and responsive after-sales service to ensure your operations run smoothly. Our support team offers 12-hour online service to address your inquiries promptly, regardless of your location worldwide.
Additionally, we have our own professional after-sales engineers who can be dispatched to your site as required. Our on-site services include installation, commissioning, operator training, and pile testing, all tailored to meet your specific needs and ensure optimal performance of your equipment.
Production-to-shipment tracking and feedback process
We provide comprehensive, end-to-end tracking and regular updates throughout the entire process, from production initiation to final shipment.
Our systematic tracking covers each critical stage: assembly, quality inspection, testing, packaging, and final loading for dispatch. At every milestone, we proactively provide detailed feedback, including photos, videos, and progress reports.
This transparent communication ensures you are fully informed and can plan confidently for the seamless arrival of your equipment, eliminating uncertainty and facilitating a smooth project timeline.
Professional pre-sales services
Our pre-sales service is designed to optimize your procurement process from the very beginning. By integrating the expertise of our sales personnel with our technical engineering team, we provide professional consultation based on your specific project requirements.
This collaborative approach significantly reduces your upfront selection costs and improves overall efficiency. We focus on delivering precise product recommendations, ensuring the proposed equipment is the most suitable and effective solution for your project needs, ultimately helping you make a well-informed and confident purchasing decision.
