ABOUT US
Sed ut perspiciatis unde omnis iste natus error sit voluptatem
accusantium doloremque laudantium, totam rem aperiam,
GET A FREE QUOTE
-
Home
-
Products
-
Hydraulic Pile Breaker
-
Round Piles Breaker
- SPA5 Pile breaker
SPA5 Pile breaker
The hydraulic pile breaker has the following features: easy, operation, high efficiency, low cost, less Noise, more safety and stability. It imposes no impact force on the parent body of the pile and no influence on the bearing capacity of the pile, and shortens the construction period greatly. It is applicable for pile-group works and is recommended strongly by the construction department and and the supervision department.
Model: SPA5
Pile diameter: 1050-1200mm
Max Drill Rod pressure: 485kN
Pile type: Round & Square pile
Model: SPA5
Pile diameter: 1050-1200mm
Max Drill Rod pressure: 485kN
Pile type: Round & Square pile
The SPA5 pile breaker adopts an advanced modular design, which can meet the construction needs of different pile diameters by changing the number of modules. By changing the number of modules, the SPA5 pile breaker can be used to cut piles with diameters of 250-1200mm, and the maximum applied force of a single chisel is 485KN, making it very suitable for concrete circular piles with relatively small diameters and not too hard.
- Environment-friendly: lts full hydraulic drive causes little noises during operation and no influence on the surrounding environments.
- Low-cost: The operating system is easy and convenient, Fewer operating workers are required to save cost for labor and machines maintenance during construction.
- Multi-function: Module generalization is realized with our SPA5 and SPF400 square pile machine. Lt can be used for both circular piles and square piles by changing the module combination.
- Small volume: lt’s light for convenient transportation.
- Safety: Contact-free operation is enabled and it can be applied for construction on complex land. form.
- Universal property: it can be driven by diverse power sources and is compatible with excavators or hydraulic system according to the construction sites conditions. it is flexible to connect multiple construction machines with universal and economical performance. The telescopic sling lifting chains meet the requirements of various landforms.
- Long service life: it is made of military material by first-class suppliers with reliable quality, extending its service life.
- Convenience: lt’s small for convenient transportation. Replaceable and changeable module combination makes its applicable for piles with various diameters. The modules can be assembled and disassembled easily and conveniently.
Parameters
| Model | SPA5 |
|---|---|
| Range of Pile diameter | 1050-1200 mm |
| Maximum Drill rod pressure | 485 kN |
| Maximum stroke of hydraulic cylinder | 150 mm |
| Maximum pressure of hydraulic cylinder | 31.5 MPa |
| Maximum flow of single cylinder | 25 L/min |
| Cut the number of pile/8h | 60 pcs |
| Height for cutting pile each time | ≤300 mm |
| One-piece module size | 895x715x400mm |
| Work status dimensions | 2670×400 |
| Total pile breaker weight | 2.5t |
| SPA5 Construction’s Parameters | ||||
|---|---|---|---|---|
| Module numbers | The diameter rangebreaker weight (kg) | Platform weight(t) | Total pile breaker weight(kg) | Height of single erush pile(mm) |
| 7 | 250-450 | 12 | 1470 | 300 |
| 8 | 400-600 | 13 | 1680 | 300 |
| 9 | 550-750 | 15 | 1890 | 300 |
| 10 | 700-900 | 18 | 2100 | 300 |
| 11 | 900-1050 | 21 | 2310 | 300 |
| 12 | 1050-1200 | 26 | 2520 | 300 |
OUR PRODUCTS
Best-selling Products
CFA Long Auger Drilling Rig
The ZB series CFA long auger drilling rig is operated by an electrical hydraulic system and adopts a walking mode or crawler base. When working, the long auger drilling rig is used to drill to the design elevation, and when lifting the drill, concrete is pumped into the pile through a concrete conveying pump (or a steel cage can be inserted later). Both drilling and piling are completed synchronously with one machine. The installation of rotary heads can also be used for various foundation construction techniques such as superfluid and long spiral drilling piles.
Fully Hydraulic CFA Drilling Rig
The fully hydraulic CFA (continuous spiral drilling pile) drilling rig is the core equipment for modern pile foundation construction, with high efficiency, low noise, environmental protection, and stable pile quality as its core advantages. It is widely used in urban and complex geological foundation engineering.
TR180W：
Torque: 90kN.m Max diameter: 800mm Max depth: 16.5m
TR220W：
Torque: 100kN.m Max diameter: 1000mm Max depth: 20m
TR250W：
Torque: 120kN.m Max diameter: 1200mm Max depth: 23.5m
TR280W：
Torque: 120kN.m Max diameter: 1200mm Max depth: 26m
SHD6 Horizontal Directional Drill
The SHD series horizontal directional drilling rig is mainly used for laying and updating pipelines for water supply, gas, electricity, telecommunications, oil, natural gas, etc. under difficult excavation conditions such as crossing highways, railways, buildings, rivers, as well as downtown areas, cultural relics protection areas, crop and vegetation protection areas. Crossing diameter 150mm-2000mm, crossing length 100-2000 meters.
Model: SHD6
Engine power: 46.3 KW
Max. Thrust force: 60KN
Max. Pullback force: 60KN
Max. Torque: 2000N.M
Max. diameter of pullback pipe: φ150~φ600mm
Max. construction length: ~100m
SNR200 Water well drilling rig
Full hydraulic multi-functional water well drill rig, the mainly drilling method is muddy rotary drilling, and DTH Hammer drilling system, can meet the drilling requirements of different geological conditions drilling and other vertical holes.
Application: It is widely used in engineering construction for drilling wells, monitoring wells and ground-source heat pump air-conditioner, and also applied in hole blasting, bolting and anchor cable, etc.
Model : SNR200
Max. Drilling Depth: 200m;
Drilling Method: Mud drilling and Air Drilling
Drilling diameter: 105-300mm
Drill Rod: 89/76mm drill rod;
Walking Type: Crawler, Trailer and Truck
SNR200T Water well drilling rig
Truck Mounted on a heavy-duty truck chassis, our truck-mounted drilling rigs deliver exceptional mobility and site-to-site versatility. Engineered for a broad spectrum of drilling applications, they are ideally suited for water well drilling, geothermal projects, mineral exploration, and civil construction works.
Model: SNR200T
Max. Drilling Depth: 200m;
Drilling Method: Mud drilling and Air Drilling
Drilling diameter: 105-300mm
Drill Rod: 89/76mm drill rod;
Walking Type: 4X4/6X4 Truck
SD-100 Desander
SD series desander Applications: Hydro Power, civil engineering, piling foundation D-wall, Grab, direct & reverse circulation holes piling and also used in TBM slurry recycling treatment. lt can cut down construction cost, reduce environmental pollution and increase efficiency.it is one of the necessary equipment for foundation construction.
The SINOVO SD-100/30 is a compact and versatile mud treatment solution perfectly suited for small-scale mines and urban construction sites. Despite its space-saving design, it delivers a robust 100m³/h processing capacity and precision dual-layer screening, making it an "agile powerhouse" for onsite mud recycling and significantly reducing waste disposal costs.
Model: SD-100/30
Solids Output Capacity: 25-50t/h
Slurry Treatment Capacity: 100m³/h
Total power: 24KW
OUR LATEST
Our Latest Blog & News
SERVICES
Services
Professional and reliable after-sales service
We provide a comprehensive and responsive after-sales service to ensure your operations run smoothly. Our support team offers 12-hour online service to address your inquiries promptly, regardless of your location worldwide.
Additionally, we have our own professional after-sales engineers who can be dispatched to your site as required. Our on-site services include installation, commissioning, operator training, and pile testing, all tailored to meet your specific needs and ensure optimal performance of your equipment.
Production-to-shipment tracking and feedback process
We provide comprehensive, end-to-end tracking and regular updates throughout the entire process, from production initiation to final shipment.
Our systematic tracking covers each critical stage: assembly, quality inspection, testing, packaging, and final loading for dispatch. At every milestone, we proactively provide detailed feedback, including photos, videos, and progress reports.
This transparent communication ensures you are fully informed and can plan confidently for the seamless arrival of your equipment, eliminating uncertainty and facilitating a smooth project timeline.
Professional pre-sales services
Our pre-sales service is designed to optimize your procurement process from the very beginning. By integrating the expertise of our sales personnel with our technical engineering team, we provide professional consultation based on your specific project requirements.
This collaborative approach significantly reduces your upfront selection costs and improves overall efficiency. We focus on delivering precise product recommendations, ensuring the proposed equipment is the most suitable and effective solution for your project needs, ultimately helping you make a well-informed and confident purchasing decision.
