ABOUT US
Sed ut perspiciatis unde omnis iste natus error sit voluptatem
accusantium doloremque laudantium, totam rem aperiam,
GET A FREE QUOTE
SD-200 Desander
SD series desander Applications: Hydro Power, civil engineering, piling foundation D-wall, Grab, direct & reverse circulation holes piling and also used in TBM slurry recycling treatment. lt can cut down construction cost, reduce environmental pollution and increase efficiency.it is one of the necessary equipment for foundation construction.
The SINOVO SD-200/60 is a high-performance mud-water separator optimized for medium-to-large-scale projects like mining and tunnel excavation. Featuring a dual-layer precision screening system and a 200m³/h processing capacity, it maximizes resource recovery and slashes waste disposal costs, providing a perfect balance of stable operation and high economic efficiency.
Model: SD-200/60
Solids Output Capacity: 25-80t/h
Slurry Treatment Capacity: 200m³/h
Total power: 48KW
The SINOVO SD-200/60 is a high-performance mud-water separator optimized for medium-to-large-scale projects like mining and tunnel excavation. Featuring a dual-layer precision screening system and a 200m³/h processing capacity, it maximizes resource recovery and slashes waste disposal costs, providing a perfect balance of stable operation and high economic efficiency.
Model: SD-200/60
Solids Output Capacity: 25-80t/h
Slurry Treatment Capacity: 200m³/h
Total power: 48KW
The SD-200/60 Desander is a powerful collaborator in the treatment of medium and large-scale engineering mud. The size of the machine is 3540×2250×2830mm, with a self weight of 4800kg, which is moderate in weight; Stable structure.
Its solid output capacity is 25-80t/h, and its sludge water output is 200m³/h, with a larger output; The selection of sieve mesh is more reasonable, with a fine sieve of 0.4×40mm on the upper layer and a coarse sieve of 3×40mm on the lower layer, resulting in higher sieving performance. The vibration motor continues to maintain the best polyurethane material to ensure stable operation and long service life of the equipment.
Power of 48kW, sufficient power. Large and medium-sized projects such as mining development and tunnel excavation can use SD-200/60 to quickly and effectively separate sand and stones from mud and water, which is beneficial for resource recovery, reducing waste discharge, and providing greater economic and environmental benefits for the project.
Technology Advantage
- The machine can start and stop automatically with one key Which is easy to use.
- Compact structure facilitates the transition and installation of equipment.
- Low energy consumption and large processing capacity
- It can effectively control cost of slurry;
- High separation accuracy ,which can quickly purify the sand content of slurry to meet the sand setting control standard of cast-in-place pile hole.
- It has two flow control functions, which can realize internal fluid circulation after external supply is cut off, protect important parts from damage, and realize adjustment of separation accuracy of thick slurry.
- Hydro cyclone, has large capacity, wear-resistant and corrosion-resistant lining of polyurethane material, and high separation accuracy.
- Vibrating screen adopts double-layer screen body, which has characteristics of wide range of shock adjustment, large discharge and low noise. It can realize functions of large particle pre-screening and fine material dehydration. The screen body is welded by steel plate with high structural strength. The sieve plate is made of polyurethane, which is wear-resistant and corrosion-resistant.
- The slurry pump adopts the special pump developed independently. It has the advantages of high conveying efficiency, stable liquid flow head and effective guarantee of the use efficiency of the cyclone. High chromium alloy wear resistant impeller and volute have the characteristics of high hardness and wear resistance.
- Slurry Tank: The internal circulation system of holding storage has two flow control functions. It can effectively adjust the workflow and pressure of the cyclone according to the different concentration of external feed. It can also realize backwashing inside equipment and prevent the thick slurry from precipitating inside equipment;
- Electronic Control System has strong compatibility and stable operation
Parameters
| SD-200/60 Main Technical Parameters | |
|---|---|
| Model | SD-200/60 |
| Length(mm) | 3540 |
| Width(mm) | 2250 |
| Height(mm) | 2830 |
| Weight(kg) | 4800 |
| Solids Output Capacity(t/h) | 25-80 |
| Slurry Treatment Capacity(m³/h) | 200 |
| Total Power(kW) | 48 |
OUR PRODUCTS
Best-selling Products
Single shaft mixing machine
This rig is specifically fitted with a mixing device for the DSM method (such as double-axis or triple-axis mixing drill rods). During construction, the rig provides stable vertical lift and downward pressure, driving the drill rods to rotate and inject cement grout, forcibly mixing soft soil with the solidifying agent to form underground continuous walls or reinforced blocks.
Application Scenarios: Soft Ground Reinforcement
Cutoff Wall: Forms an interlocking continuous wall for water isolation in excavation pits.
Foundation Reinforcement: Enhances the bearing capacity of soft ground and reduces settlement.
Environmental Remediation: Used for in-situ solidification treatment of contaminated soil.
CFA Long Auger Drilling Rig
The ZB series CFA long auger drilling rig is operated by an electrical hydraulic system and adopts a walking mode or crawler base. When working, the long auger drilling rig is used to drill to the design elevation, and when lifting the drill, concrete is pumped into the pile through a concrete conveying pump (or a steel cage can be inserted later). Both drilling and piling are completed synchronously with one machine. The installation of rotary heads can also be used for various foundation construction techniques such as superfluid and long spiral drilling piles.
Fully Hydraulic CFA Drilling Rig
The fully hydraulic CFA (continuous spiral drilling pile) drilling rig is the core equipment for modern pile foundation construction, with high efficiency, low noise, environmental protection, and stable pile quality as its core advantages. It is widely used in urban and complex geological foundation engineering.
TR180W：
Torque: 90kN.m Max diameter: 800mm Max depth: 16.5m
TR220W：
Torque: 100kN.m Max diameter: 1000mm Max depth: 20m
TR250W：
Torque: 120kN.m Max diameter: 1200mm Max depth: 23.5m
TR280W：
Torque: 120kN.m Max diameter: 1200mm Max depth: 26m
SPA5 Pile breaker
The hydraulic pile breaker has the following features: easy, operation, high efficiency, low cost, less Noise, more safety and stability. It imposes no impact force on the parent body of the pile and no influence on the bearing capacity of the pile, and shortens the construction period greatly. It is applicable for pile-group works and is recommended strongly by the construction department and and the supervision department.
Model: SPA5
Pile diameter: 1050-1200mm
Max Drill Rod pressure: 485kN
Pile type: Round & Square pile
SHD6 Horizontal Directional Drill
The SHD series horizontal directional drilling rig is mainly used for laying and updating pipelines for water supply, gas, electricity, telecommunications, oil, natural gas, etc. under difficult excavation conditions such as crossing highways, railways, buildings, rivers, as well as downtown areas, cultural relics protection areas, crop and vegetation protection areas. Crossing diameter 150mm-2000mm, crossing length 100-2000 meters.
Model: SHD6
Engine power: 46.3 KW
Max. Thrust force: 60KN
Max. Pullback force: 60KN
Max. Torque: 2000N.M
Max. diameter of pullback pipe: φ150~φ600mm
Max. construction length: ~100m
SNR200 Water well drilling rig
Full hydraulic multi-functional water well drill rig, the mainly drilling method is muddy rotary drilling, and DTH Hammer drilling system, can meet the drilling requirements of different geological conditions drilling and other vertical holes.
Application: It is widely used in engineering construction for drilling wells, monitoring wells and ground-source heat pump air-conditioner, and also applied in hole blasting, bolting and anchor cable, etc.
Model : SNR200
Max. Drilling Depth: 200m;
Drilling Method: Mud drilling and Air Drilling
Drilling diameter: 105-300mm
Drill Rod: 89/76mm drill rod;
Walking Type: Crawler, Trailer and Truck
OUR LATEST
Our Latest Blog & News
SERVICES
Services
Professional and reliable after-sales service
We provide a comprehensive and responsive after-sales service to ensure your operations run smoothly. Our support team offers 12-hour online service to address your inquiries promptly, regardless of your location worldwide.
Additionally, we have our own professional after-sales engineers who can be dispatched to your site as required. Our on-site services include installation, commissioning, operator training, and pile testing, all tailored to meet your specific needs and ensure optimal performance of your equipment.
Production-to-shipment tracking and feedback process
We provide comprehensive, end-to-end tracking and regular updates throughout the entire process, from production initiation to final shipment.
Our systematic tracking covers each critical stage: assembly, quality inspection, testing, packaging, and final loading for dispatch. At every milestone, we proactively provide detailed feedback, including photos, videos, and progress reports.
This transparent communication ensures you are fully informed and can plan confidently for the seamless arrival of your equipment, eliminating uncertainty and facilitating a smooth project timeline.
Professional pre-sales services
Our pre-sales service is designed to optimize your procurement process from the very beginning. By integrating the expertise of our sales personnel with our technical engineering team, we provide professional consultation based on your specific project requirements.
This collaborative approach significantly reduces your upfront selection costs and improves overall efficiency. We focus on delivering precise product recommendations, ensuring the proposed equipment is the most suitable and effective solution for your project needs, ultimately helping you make a well-informed and confident purchasing decision.
