ABOUT US
Sed ut perspiciatis unde omnis iste natus error sit voluptatem
accusantium doloremque laudantium, totam rem aperiam,
GET A FREE QUOTE
-
Home
-
Products
-
Casing Application
-
Casing Extractor
- Full Hydraulic Extractor
Full Hydraulic Extractor
The fully hydraulic Extractor is a mechanical equipment specifically used for lifting and pulling drilling protective casing and Kelly bar. It mainly consists of hydraulic pump station, pipe pulling cylinder, base, slip seat, upper and lower slips and other components.
Model: SE1200 & SE1500
Pile diameter: 800-1500mm
Pull force: 320Ton & 500Ton
Clamp force: 120Ton & 200Ton
Model: SE1200 & SE1500
Pile diameter: 800-1500mm
Pull force: 320Ton & 500Ton
Clamp force: 120Ton & 200Ton
The SE series hydraulic Extractor is a supporting auxiliary equipment for drilling and casing construction, as well as underground wall construction in various geotechnical drilling and excavation projects. It is suitable for construction projects that use pipe following drilling technology, such as fully rotary drilling or rotary drilling rig casing follow-up grouting piles, interlocking piles, rotary jet drilling, anchor holes, underground continuous wall protective pipes, etc. It is used to pull out drilling and wall protective casings and Kelly bar. It can also be used for handling various drilling tool accidents, such as pulling out casing and Kelly bar.
Parameters
| Model | SE1200 | SE1500 |
|---|---|---|
| Casing extractor diameter | 1200mm | 1500mm |
| System pressure | 30MPa(max.) | 30MPa(max.) |
| Working pressure | 30MPa | 30MPa |
| Four jack stroke | 1000mm | 1000mm |
| Clamping cylinder stroke | 300mm | 300mm |
| Pull force | 320ton | 500ton |
| Clamp force | 120ton | 200ton |
| Total weight | 6.1ton | 8ton |
| Oversize | 3000x2200x2000mm | 3700x2200x2100mm |
| Power pack | Motor power station | Motor power station |
| Rate power | 45kw/1500 | 45kw/1500 |
Power Station
| Item | Unit | Motor power station |
|---|---|---|
| Engine | Three-phase asynchronous motor | |
| Power | Kw | 45 |
| Rotation speed | rpm | 1500 |
| Fuel delivery | L/min | 150 |
| Working pressure | Mpa | 25 |
| Tank capacity | L | 850 |
| Overall dimension | mm | 1920*1400*1500 |
| Weight (excluding hydraulic oil) |
Kg | 1500 |
OUR PRODUCTS
Best-selling Products
Single shaft mixing machine
This rig is specifically fitted with a mixing device for the DSM method (such as double-axis or triple-axis mixing drill rods). During construction, the rig provides stable vertical lift and downward pressure, driving the drill rods to rotate and inject cement grout, forcibly mixing soft soil with the solidifying agent to form underground continuous walls or reinforced blocks.
Application Scenarios: Soft Ground Reinforcement
Cutoff Wall: Forms an interlocking continuous wall for water isolation in excavation pits.
Foundation Reinforcement: Enhances the bearing capacity of soft ground and reduces settlement.
Environmental Remediation: Used for in-situ solidification treatment of contaminated soil.
CFA Long Auger Drilling Rig
The ZB series CFA long auger drilling rig is operated by an electrical hydraulic system and adopts a walking mode or crawler base. When working, the long auger drilling rig is used to drill to the design elevation, and when lifting the drill, concrete is pumped into the pile through a concrete conveying pump (or a steel cage can be inserted later). Both drilling and piling are completed synchronously with one machine. The installation of rotary heads can also be used for various foundation construction techniques such as superfluid and long spiral drilling piles.
Fully Hydraulic CFA Drilling Rig
The fully hydraulic CFA (continuous spiral drilling pile) drilling rig is the core equipment for modern pile foundation construction, with high efficiency, low noise, environmental protection, and stable pile quality as its core advantages. It is widely used in urban and complex geological foundation engineering.
TR180W：
Torque: 90kN.m Max diameter: 800mm Max depth: 16.5m
TR220W：
Torque: 100kN.m Max diameter: 1000mm Max depth: 20m
TR250W：
Torque: 120kN.m Max diameter: 1200mm Max depth: 23.5m
TR280W：
Torque: 120kN.m Max diameter: 1200mm Max depth: 26m
SPA5 Pile breaker
The hydraulic pile breaker has the following features: easy, operation, high efficiency, low cost, less Noise, more safety and stability. It imposes no impact force on the parent body of the pile and no influence on the bearing capacity of the pile, and shortens the construction period greatly. It is applicable for pile-group works and is recommended strongly by the construction department and and the supervision department.
Model: SPA5
Pile diameter: 1050-1200mm
Max Drill Rod pressure: 485kN
Pile type: Round & Square pile
SHD6 Horizontal Directional Drill
The SHD series horizontal directional drilling rig is mainly used for laying and updating pipelines for water supply, gas, electricity, telecommunications, oil, natural gas, etc. under difficult excavation conditions such as crossing highways, railways, buildings, rivers, as well as downtown areas, cultural relics protection areas, crop and vegetation protection areas. Crossing diameter 150mm-2000mm, crossing length 100-2000 meters.
Model: SHD6
Engine power: 46.3 KW
Max. Thrust force: 60KN
Max. Pullback force: 60KN
Max. Torque: 2000N.M
Max. diameter of pullback pipe: φ150~φ600mm
Max. construction length: ~100m
SNR200 Water well drilling rig
Full hydraulic multi-functional water well drill rig, the mainly drilling method is muddy rotary drilling, and DTH Hammer drilling system, can meet the drilling requirements of different geological conditions drilling and other vertical holes.
Application: It is widely used in engineering construction for drilling wells, monitoring wells and ground-source heat pump air-conditioner, and also applied in hole blasting, bolting and anchor cable, etc.
Model : SNR200
Max. Drilling Depth: 200m;
Drilling Method: Mud drilling and Air Drilling
Drilling diameter: 105-300mm
Drill Rod: 89/76mm drill rod;
Walking Type: Crawler, Trailer and Truck
OUR LATEST
Our Latest Blog & News
SERVICES
Services
Professional and reliable after-sales service
We provide a comprehensive and responsive after-sales service to ensure your operations run smoothly. Our support team offers 12-hour online service to address your inquiries promptly, regardless of your location worldwide.
Additionally, we have our own professional after-sales engineers who can be dispatched to your site as required. Our on-site services include installation, commissioning, operator training, and pile testing, all tailored to meet your specific needs and ensure optimal performance of your equipment.
Production-to-shipment tracking and feedback process
We provide comprehensive, end-to-end tracking and regular updates throughout the entire process, from production initiation to final shipment.
Our systematic tracking covers each critical stage: assembly, quality inspection, testing, packaging, and final loading for dispatch. At every milestone, we proactively provide detailed feedback, including photos, videos, and progress reports.
This transparent communication ensures you are fully informed and can plan confidently for the seamless arrival of your equipment, eliminating uncertainty and facilitating a smooth project timeline.
Professional pre-sales services
Our pre-sales service is designed to optimize your procurement process from the very beginning. By integrating the expertise of our sales personnel with our technical engineering team, we provide professional consultation based on your specific project requirements.
This collaborative approach significantly reduces your upfront selection costs and improves overall efficiency. We focus on delivering precise product recommendations, ensuring the proposed equipment is the most suitable and effective solution for your project needs, ultimately helping you make a well-informed and confident purchasing decision.
